ABB ACS800-04, Hardware Manual

Page: 93 / 118

Technical data
93
Cable entries
Mains, motor and brake resistor cable terminal sizes (per phase), maximum
accepted cable and tightening torques are given below.
Dimensions, weights and noise
H height
W1 width of the basic unit with PE terminal (bookshelf)
W2 width with the cable connection terminal plates on the left side only (bookshelf)
(R7: width with the cable connection terminal plates on both sides is 579 mm)
(R8: width with the cable connection terminal plates on both sides is 776 mm)
D depth without fastening brackets
(R7 bookshelf: depth with fastening brackets is 516 mm)
(R8 bookshelf: depth with fastening brackets is 571 mm)
W3 width of the basic unit with PE terminal/busbar (flat)
W4 width with the cable connection terminal plates (flat)
H height without top and bottom exit busbar shrouds
W width
D depth
* weight without top entry and bottom exit shrouds
Frame
size U1, V1, W1, U2, V2, W2, UDC+/R+, UDC-, R- Earthing PE
Number of holes per
phase
Max. cable Screw Tightening
torque
Screw Tightening
torque
mm
2
Nm Nm
R7 3 1×240 or
2×185
M12 50...75 M10 30...44
R8 3 3×240 M12 50...75 M10 30...44
Frame size IP 00 Weight Noise
Busbars on the long side
(bookshelf)
Busbars on the short side (flat)
H W1 W2 D H W3 W4 D
mm mm mm mm mm mm mm mm kg dB
R7 1121 334 427 473 1181 525 631 259 100 71
R8 1564 415 562 568 1596 607 779 403 200 72
Frame size IP 00, with bottom exit Weight *
H W D
mm mm mm kg
R7 1126 264 471 91