ABB AC 800M, Configuration

Page: 84 / 260

I/O Settings Section 3 Device Import Wizard
84 9ARD000014-600 A
c. Enter the port number in the
Port Number
field or select
Use Default
to
set the default value.
d. Under
Write Tag 1
, enter or select the following details:
–
Service ID
: Select
CIP Table Write Service
from the drop-down list.
This is the vendor specific CIP service to be executed to read or write the
data.
–
Data Type
: Select data type from the drop-down list. After data type is
selected,
Configured channels
window is opened as shown in Figure 35 .
The data type is defined for each tag for the Class 3 connections. The
following are the supported standard data types:
– SINT
– INT
– DINT
– REAL
– BOOL
– DWORD
– USINT
– UDINT
– BYTE
– WORD
– STRUCTURE. If this data type is selected,
DataSize
dialog box appears
as shown in Figure 33 .
If the 64-bit data type is Dword, the data can be split into 2 Dword each of 32-bit
data type.

64 bit data of any other data type like Real and Integer is not supported.
–
No. of elements
: Type the number of data elements of the particular data
type, that is read or written from or to Allen Bradley PLC device.