manualshive.com logo in svg

ABB AC 800M, Configuration

Share
Download
ABB AC 800M Configuration Download Page 57

Section 3  Device Import Wizard

Device

9ARD000014-600 A

57

 

Device

The 

Device

 tab displays the device information of the EDS file being imported. The 

Device

 tab has a tree view on the left pane. The tree view displays devices by their 

product names or catalog numbers, depending on whether 

Catalog number

 or 

Product name

 option is selected. By default, Product name is selected.

The tree view has check mark icons beside the product names or catalog numbers. 
The color of a check mark icon indicates the following:

• Green – Indicates that the EDS file is being imported for the first time.

• Blue – Indicates that the EDS file is being re-imported.

• Red - Indicates that the EDS file import was aborted during a previous import.

Selecting a product name or catalog name from the tree view displays the following 
details:

•

Product name.

•

Product type description.

•

Vendor name.

•

Major revision number.

•

Minor revision number.

•

Catalog number.

Modify the following details as required:

•

Product name as in HWD file - The product name as it appears in the HWD 
file.

•

Description - A brief description of the product.

•

Hardware Tree icon - This drop-down list enables to change the icon displayed 
in the Control Builder Hardware tree. The listed icons are shown in 

Table 12

:

Summary of Contents for AC 800M





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands