This document adds the following points to the still valid existing documentation:
● Unavoidable device deviations, e.g. due to technical limitations.
● Expansion of documentation as a result of normative requirements.
● Additional contents not described in the existing documentation.
Further information on replacement device 07DC92-AD can be found in the operating and
assembly instructions of device 07DC92-AD: 3ADR020151M0401. Please note that no separate
operating and assembly instructions are available for device 07DC92.
Please also observe the system data as well as the information on CS31 bus
“System data and CS31 bus system data” on page 4
1.5.2.1
Device configuration
Fig. 46: 3ADR333196F0015_07DC92-AD_Front
No.
Description
1
Connector X1: CS31 bus
2
Connector X2: 8 DC + voltage supply (incl. DO524)
3
Connector X3: 8 DC + voltage supply (incl. DO524)
4
Hole for screw mounting (screw diameter 4 mm, extension torque 1.2 Nm)
5
Status LEDs for DO524
6
DIP switch for address setting (ADDR)
7
Connector X6: 8 DC + voltage supply (incl. DO524)
8
Connector X5: 8 DC + voltage supply (incl. DO524)
9
Connector X4: Voltage supply (incl. DO524)
10
Ventilation
11
TA525: Label
12
4 LEDs to display the status of the complete 07DC92-AD device
AC31 Adapters
Replacement devices: I/O modules > Replacement device 07DC92-AD
2018/09/24
3ADR010122, 8, en_US
73
