Commissioning
System Manual
│120
6.7.4
"Smart Access Point"
Completely resetting the "Smart Access Point".
– Here all entered data, performed settings, etc., are deleted. After the reset the "Smart
Access Point" will be in the state at the point of delivery.
– After the reset, an initial commissioning of the "Smart Access Point" must be carried out.
– After the initial commissioning, old data can be read in via an available backup.
Fig. 97: Completely resetting the "Smart Access Point"
Use the following steps for the reset:
1. Connect a PC with the "Smart Access Point".
– More detailed information for connecting, see chapter 6.3.2 “Connecting a PC with the
"Smart Access Point ““ on page 83.
2. Change to the "Settings" / "Service" function.
3. Call up the "Reset default settings" function.
4. Select the areas that are to be reset.
5. Confirm the selection.
– The "Smart Access Point" is being reset.
– After the reset the connection to the "Smart Access Point" is no longer active.
– The "Smart Access Point" must be put back into operation via an initial commissioning,
see chapter 6.3.4 “Commissioning the "Smart Access Point"“ on page 89.
