manualshive.com logo in svg

Abarth Grande Punto, Owner'S Handbook Manual

The "Abarth Grande Punto" Owner's Handbook Manual is the essential guide for every Abarth enthusiast. Experience the incredible performance and precision of this iconic hatchback with the help of our comprehensive manual available for free download from manualshive.com. Unleash your driving experience with this must-have resource.

Share
Download
background image

107

CORRECT USE OF THE CAR

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

IMPORTANT The front air bags and/or
side bags may be deployed if the car is sub-
ject to heavy knocks or accidents involv-
ing the underbody area, such as for ex-
ample violent shocks, against steps, kerbs
or low obstacles, falling of the car in big
holes or sags in the road.

IMPORTANT When the airbag inflates it
emits a small amount of dusts. These dusts
are harmless and is not the beginning of
a fire; then the unfold cushion surface and
the car interiors can be covered by a dusty
remains: this dust can irritate skin and
eyes. In case of contact, wash yourself us-
ing neutral soap and water. 

Expiration dates of pyrotechnic charge and
coil contact are indicated on the label in-
side the glovebox. As these dates ap-
proach, contact Abarth Dealership to have
them replaced.

IMPORTANT Should an accident occur in
which any of the safety devices is activat-
ed, take the car to a Abarth Dealership to
have the devices activated replaced and to
have the system checked.

Every control, repair and replacement op-
erations concerning the air bags must on-
ly be carried out c/o Abarth Dealership.

If you are having the car scrapped, have
the air bag system deactivated at a Abarth
Dealership first. If the car changes own-
ership, the new owner must be informed
of the method of use of air bags and the
above warnings and also be given this
“Owner Handbook”.

IMPORTANT The triggering of preten-
sioners, front air bags and side bags is de-
cided in a differentiated manner by the
electronic control unit, depending on the
type of crash. The failure to deploy one or
more of them does not mean that the sys-
tem is not working properly.

Never rest head, arms and
elbows on the door, on the

windows and in the window bag area
to prevent possible injuries during in-
flation phase.

WARNING

Never lean head, arms and
elbows out of window.

WARNING

GENERAL WARNINGS

If when turning the key to
MAR the warning light 

¬

does not turn on or if it stays on when
travelling (with the message on the
reconfigurable multifunction display)
there could be a failure in safety sys-
tems; in this event air bags or pre-
tensioners could not trigger in case of
impact or, in a minor number of cas-
es, they could trigger accidentally.
Contact Abarth Dealership immedi-
ately to have the system checked.

WARNING

Do not cover the backrest of
front and rear seats with

trims or covers that are not suitable
to be used with side bags.

WARNING

Never travel with objects on
your lap, in front of your

chest or with a pipe, pencil, etc. be-
tween your lips; injury may result in
the event of the air bag being trig-
gered.

WARNING

091-108 Abarth GB:091-108 Abarth GB  8-06-2009  13:37  Pagina 107

Summary of Contents for Grande Punto















































































































































































































Reviews:

No comments

Related manuals for Grande Punto

Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
Jeep GRAND CHEROKEE 2023 Information Manual preview
GRAND CHEROKEE 2023
Brand: Jeep Pages: 108
3SIXT 3S-1186 Operating Instructions Manual preview
3S-1186
Brand: 3SIXT Pages: 12
Camcar 40061 Fe Mounting Instructions preview
40061 Fe
Brand: Camcar Pages: 2
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9
Acura 2006 TSX Owner'S Manual preview
2006 TSX
Brand: Acura Pages: 2
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
Opel 2013 Corsa Brochure & Specs preview
2013 Corsa
Brand: Opel Pages: 32
AEM 30-3500 Instruction Manual preview
30-3500
Brand: AEM Pages: 27
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
FORM FIT 8F 00 Installation Instructions preview
8F 00
Brand: FORM FIT Pages: 2
ROADGEAR RGABM1 User Manual & Fitting Instructions preview
RGABM1
Brand: ROADGEAR Pages: 2
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
Kuda-Phonebase 284380 Installation Instruction preview
284380
Brand: Kuda-Phonebase Pages: 3
Ford TRANSIT 2015 Quick Reference Manual preview
TRANSIT 2015
Brand: Ford Pages: 8

Brands by name

Popular brands

Load more brands