Abarth Grande Punto Owner'S Handbook Manual Download

Page: 31 / 206

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

HEAD RESTRAINTS

FRONT fig. 23

The front headrests are fixed to the seat
bench and their height is not adjustable.

fig. 23

F0M009Ab

fig. 24

F0M0026m

To optimise head restraint protective ac-
tion, adjust the seat back upright and keep
your head as close as possible to the head
restraint.

REAR (for versions/markets,
where provided) fig. 24

To use the head restraint, raise it until hear-
ing the click (position of use).

To bring it back to the original position
(position of non use), press button

and

push the head restraint down into the
back rest.

To lift out rear head restraints: press at
the same time buttons

and

set on

both sides and take them out.

IMPORTANT Rear seat passengers shall
always set the head restraints in the po-
sition of use.

028-074 Abarth GB:028-088 Abarth GB 8-06-2009 14:29 Pagina 30

Summary of Contents for Grande Punto















































































































































































































Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands

Abarth Grande Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands