Abarth Grande Punto Owner'S Handbook Manual Download

Page: 180 / 206

179

ARNING

LIGHTS AND MESSAGES

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

CAR

MAINTENANCE

CLEANING SEATS AND FABRIC
AND VELVET PARTS

Use a soft brush or vacuum cleaner to re-
move dust. Velvet is cleaned better if the
brush is moistened.

Rub the seats with a sponge moistened
with a solution of water and neutral de-
tergent.

Never use flammable prod-
ucts like oil ether or rectified

petrol for cleaning car interiors. Elec-
trostatic discharges generated by rub-
bing during cleaning operations could
cause fire.

WARNING

Do not keep aerosol cans in
the car: they might explode.

Aerosol cans must never be exposed
to a temperature above 50° C. The
temperature inside the car exposed
to the sun may go well beyond that
figure.

WARNING

INTERIORS

Periodically check that water is not trapped
under the mats (due to water dripping off
shoes, umbrellas, etc.) which could cause
oxidisation of the sheet metal.

161-180 Abarth GB:161-180 Abarth GB 8-06-2009 14:03 Pagina 179

Summary of Contents for Grande Punto















































































































































































































Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands

Abarth Grande Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands