Abarth Grande Punto Owner'S Handbook Manual Download

Page: 177 / 206

176

ARNING

LIGHTS AND MESSAGES

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

CAR

MAINTENANCE

These include:

❒

Painting products and systems which

give the car particular resistance to cor-
rosion and abrasion;

❒

Use of galvanised (or pretreated) steel
sheets, with high resistance to corro-
sion;

❒

Spraying the underbody, engine com-
partment, wheelhouse internal parts
and other parts with highly protective
wax products;

❒

Spraying of plastic parts, with a pro-
tective function, in the more exposed
points: underdoor, inner fender parts,
edges, etc.;

❒

Use of “open” boxed sections to pre-
vent condensation and pockets of mois-
ture from triggering rust inside.

BODYWORK

PROTECTION FROM
ATMOSPHERIC AGENTS

The main causes of corrosion are the fol-
lowing:

❒

atmospheric pollution;

❒

salty air and humidity (coastal areas, or
hot humid climates);

❒

seasonal environment conditions.

Not to be underestimated is also the abra-
sive action of wind-borne atmospheric
dust and sand and mud and gravel raised
by other cars.

On your car, Abarth implemented the
best manufacturing technologies to effec-
tively protect the bodywork against cor-
rosion.

Rear window wiper fig. 10

Rear window washer jets are fixed.

The nozzle holder is on the rear window.

fig. 10

F0M046Ab

161-180 Abarth GB:161-180 Abarth GB 8-06-2009 14:03 Pagina 176

Summary of Contents for Grande Punto















































































































































































































Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands

Abarth Grande Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands