Abarth Grande Punto Owner'S Handbook Manual Download

Page: 24 / 206

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

Language (Selecting the language)

The messages may be displayed in the fol-
lowing languages: Italian, German,
English, Spanish, French, Portuguese,
Dutch.

To set the required language proceed as
follows:

– briefly press button

MENU ESC

: the

previously set “language” “ will flash on the
display;

– press button

–

for setting;

– briefly press button

MENU ESC

to go

back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.

Buzzer volume (Adjusting the
failure/warning buzzer volume)

With this function the volume of the
buzzer accompanying any failure/warning
indication can be adjusted according to 8
levels.

To adjust the volume proceed as follows:

– briefly press button

MENU ESC

: the

previously set volume “level” will flash on
the display;

– press button

–

for setting;

– briefly press button

MENU ESC

to go

back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.

Button volume
(Button volume adjustment)

This function may be used to adjust the
volume of the beep accompanying the ac-
tivation of buttons

MENU ESC

and

–

can be adjusted according to 8 levels.

To adjust the volume proceed as follows:

– briefly press button

MENU ESC

: the

previously set volume “level” will flash on
the display;

– press button

–

for setting;

– briefly press button

MENU ESC

to go

back to the menu screen or press the but-
ton for long to go back to the standard
screen without storing settings.

Belt buzzer (Buzzer activation
for S.B.R. indication)

This function can be only displayed after
Abarth Dealership has deactivated the
S.B.R. system (see paragraph “S.B.R. sys-
tem” in section “Safety devices”).

001-027 Abarth GB:001-027 Abarth GB 22-09-2009 13:32 Pagina 23

Summary of Contents for Grande Punto















































































































































































































Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands

Abarth Grande Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands