Abarth Grande Punto Owner'S Handbook Manual Download

Page: 192 / 206

191

ARNING

LIGHTS AND MESSAGES

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

PERFORMANCE

Top admitted speed after initial car use in km/h.

1.4 T-JET

208

Weights (kg)

1.4 T-JET

Empty weight (including all fluids, fuel tank at 90% and with no optional):

1185

Payload (*) including the driver:

480

Maximum admitted loads (**)
– front axle:

950

– rear axle:

850

– total:

1665

Towable loads
– trailer with brakes:

500

– trailer without brakes:

400

Maximum load on roof:

Maximum load on tow hitch (trailer with brakes):

(*)

If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload.

(**) Loads not be exceeded. The driver is responsible for arranging the loads in the boot and/or on the roof so that they comply with these

limits.

WEIGHTS

181-196 Abarth GB:181-196 Abarth GB 22-09-2009 13:29 Pagina 191

Summary of Contents for Grande Punto















































































































































































































Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands

Abarth Grande Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands