Abarth Grande Punto Owner'S Handbook Manual Download

Page: 112 / 206

111

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

STOPPING THE ENGINE

Turn the ignition to

STOP

while the en-

gine is idling.

IMPORTANT After a taxing drive, you
should allow the engine to “catch its
breath” before turning it off by letting it
idle to allow the temperature in the en-
gine compartment to fall.

A quick burst on the acceler-
ator before turning off the en-
gine serves absolutely no
practical purpose, it wastes

fuel and is damaging especially to tur-
bocharged engines.

HOW TO WARM UP THE
ENGINE AFTER IT HAS JUST
STARTED

Proceed as follows:

❒

Drive off slowly, letting the engine turn
at medium revs. Do not accelerate
abruptly;

❒

Do not drive at full performance for the
initial kilometres. Wait until the coolant
temperature gauge starts moving.

Remember that the servo-
brake and power steering are
not operational until the en-
gine has been started, there-

fore much effort than usual is required
on the brake pedal and steering wheel.

Never bump start the engine
by pushing, towing or coast-
ing downhill as this could
cause fuel to flow into the

catalytic exhaust system and damage
it beyond repair.

109-120 Abarth GB:109-120 Abarth GB 8-06-2009 13:38 Pagina 111

Summary of Contents for Grande Punto















































































































































































































Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands

Abarth Grande Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands