Abarth Grande Punto Owner'S Handbook Manual Download

Page: 74 / 206

SAFETY DEVICES

CORRECT USE OF THE CAR

ARNING

LIGHTS AND MESSAGES

IIN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

For safety reasons the bon-
net must be closed properly

to avoid its opening while the car is
travelling. Therefore, always check it
is properly closed and the catch en-
gaged. Should you notice that the
catch is not perfectly engaged when
travelling, stop the car immediately
and close the bonnet.

WARNING

If the supporting rod is not
positioned correctly the bon-

net may fall violently.

WARNING

Carry out operations only
when the car is stationary.

WARNING

ROOF RACK/SKI RACK

Front couplings are set at points

A-fig. 92

Front couplings are set at points

near

the silk-screen printing (

) on rear side

windows.

IMPORTANT Strictly follow the installa-
tion instructions contained in the kit. In-
stallation hall be carried out by skilled per-
sonnel.

After travelling a few kilo-
metres, check that the cou-

pling fastening screws are tight.

WARNING

Strictly comply with current
law regulations concerning
max. overall dimensions.

Distribute the load evenly
and when driving, bear in

mind the increased sensitivity of the
car to side wind.

WARNING

Never exceed the permitted
weight (see section “Techni-
cal specifications”).

fig. 92

F0M023Ab

028-074 Abarth GB:028-088 Abarth GB 8-06-2009 14:30 Pagina 73

Summary of Contents for Grande Punto















































































































































































































Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands

Abarth Grande Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Grande Punto

Reviews:

Related manuals for Grande Punto

Brands by name

Popular brands