manualshive.com logo in svg

Abarth Grande Punto, Owner'S Handbook Manual

The "Abarth Grande Punto" Owner's Handbook Manual is the essential guide for every Abarth enthusiast. Experience the incredible performance and precision of this iconic hatchback with the help of our comprehensive manual available for free download from manualshive.com. Unleash your driving experience with this must-have resource.

Share
Download
background image

26

SAFETY DEVICES

CORRECT USE OF THE CAR

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

“Trip B”, available on multifunction display
only, shall be used to display the figures
relating to:

– Trip distance B

– Average consumption B

– Average speed B

– Travel time B (driving time).

Note

“Trip B” function can be excluded

(see paragraph “Trip B On/Off”). “Range”
and “Instant consumption” cannot be re-
set.

Average consumption

This value shows the average consump-
tion from the start of the new mission.

Instant consumption

This value shows instant fuel consumption
(this value is updated second by second).
If parking the car with engine on, 
the display will show “----”.

Average speed

This value shows the car average speed as
a function of the overall time elapsed since
the start of the new mission.

Travel time

This value shows the time elapsed since
the start of the new mission.

IMPORTANT Lacking information, Trip
computer values are displayed with “----”.
When normal operating condition is re-
set, calculation of different units will
restart regularly. Values displayed before
the failure will not be reset.

Values displayed

Range

This value shows the distance in km (or
mi) that the car can still cover before  
needing fuel, assuming that driving condi-
tions are kept unvaried. The display will
show “----” in the following cases:

– value lower than 50 km (or 30 mi)

– car left parked with engine running for
long.

IMPORTANT The variation of the auton-
omy value can be influenced by different
factors: driving style (see what is described
in paragraph “Driving style” in the chap-
ter “Start-up and driving”), type of route
(highways, urban, mountain, etc…), use
conditions of the car (load transported,
tire pressure, etc…). What was described
previously must be taken in consideration
when planning a trip.

Trip distance

This value shows the distance covered
from the start of the new mission.

001-027 Abarth GB:001-027 Abarth GB  22-09-2009  13:32  Pagina 26

Summary of Contents for Grande Punto















































































































































































































Reviews:

No comments

Related manuals for Grande Punto

UnderCover 2110 Installation Manual preview
2110
Brand: UnderCover Pages: 16
Daihatsu TERIOS J100 Maintenance Manual preview
TERIOS J100
Brand: Daihatsu Pages: 43
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Audiovox Prestige APS-45B Installation Manual preview
Prestige APS-45B
Brand: Audiovox Pages: 8
Volvo 1985 740 GL Owner'S Manual preview
1985 740 GL
Brand: Volvo Pages: 138
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16
Audi A4 2016 Quick Questions And Answers preview
A4 2016
Brand: Audi Pages: 9
Belkin WIC004 Setting Up preview
WIC004
Brand: Belkin Pages: 4
Toyota 1973 Crown Hardtop Owner'S Manual preview
1973 Crown Hardtop
Brand: Toyota Pages: 50
Subaru 2016 Outback Owner'S Manual preview
2016 Outback
Brand: Subaru Pages: 99
Curt Manufacturing 31048 Installation Instructions Manual preview
31048
Brand: Curt Manufacturing Pages: 6
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Xpresskit DBALL2-HK7 Installation Manual preview
DBALL2-HK7
Brand: Xpresskit Pages: 18

Brands by name

Popular brands

Load more brands