manualshive.com logo in svg

Abarth Grande Punto, Owner'S Handbook Manual

The "Abarth Grande Punto" Owner's Handbook Manual is the essential guide for every Abarth enthusiast. Experience the incredible performance and precision of this iconic hatchback with the help of our comprehensive manual available for free download from manualshive.com. Unleash your driving experience with this must-have resource.

Share
Download
background image

136

W

ARNING

LIGHTS AND MESSAGES

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

IINDEX

DASHBOARD AND CONTROLS

SAFETY DEVICES

CORRECT USE OF THE CAR

IN AN

EMERGENCY

IT SHOULD BE NOTICED THAT:

The sealing fluid of the quick tyre repair
kit is effective with external temperatures
between –20 °C and +50 °C. 

The sealing fluid has limited life. 

INFLATING PROCEDURE

The compressor shall not be
operated for more than 20

minutes. Risk of overheating. Tyres
repaired with the quick tyre repair kit
shall be used temporarily only.

WARNING

The cylinder contains ethyl-
ene glycol. The cylinder con-

tains latex: it can cause allergic reac-
tions. It is harmful if ingested or in-
haled and irritant for the eyes and in
case of contact. In case of contact
rinse immediately with water and take
off contaminated clothes. If swal-
lowed, do not induce vomit, rinse out
the mouth, drink a lot of water and
call the doctor immediately. Keep
away from children. This product must
not be used by asthmatics. Do not in-
hale vapours. Call the doctor imme-
diately in case of allergic reactions.
Keep the cylinder in the space provid-
ed for the purpose and far from heat.
The sealing fluid has limited life.

WARNING

Replace the cylinder if sealer
has run out. Do not throw
away the cylinder and the
sealing fluid. Have the sealing

fluid and the cylinder disposed of in
compliance with national and local
regulations.

Put on the protection gloves
provided together with quick

tyre repair kit.

WARNING

❒

Pull up the handbrake

. Loosen tyre

inflation valve cap, take out the filler
hose 

A-fig. 4

and screw the ring nut

B

on the tyre valve;

Repairs are not possible in
case of damages on the

wheel rim (bad groove distortion
causing air loss). Do not remove for-
eign bodies (screws or nails) from the
tyre.

WARNING

fig. 4

F0M038Ab

133-160 Abarth GB:133-160 Abarth GB  22-09-2009  13:27  Pagina 136

Summary of Contents for Grande Punto















































































































































































































Reviews:

No comments

Related manuals for Grande Punto

RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
Victory 4x4 UNI-UPRS Install Instructions Manual preview
UNI-UPRS
Brand: Victory 4x4 Pages: 13
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
RAM 2011 DAKOTA User Manual preview
2011 DAKOTA
Brand: RAM Pages: 76
Advantech TREK-550 Manual preview
TREK-550
Brand: Advantech Pages: 59
Enduro autoSteady AS101 User Manual preview
autoSteady AS101
Brand: Enduro Pages: 48
SAAS StreetLine Series Installation Instructions preview
StreetLine Series
Brand: SAAS Pages: 4
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
Fab Fours H4550 Installation Instructions Manual preview
H4550
Brand: Fab Fours Pages: 13
Yakima LowRider Manual preview
LowRider
Brand: Yakima Pages: 15
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Brand: Billien Pages: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Brand: Lexus Pages: 28
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
Prorack K349 Fitting Instructions Manual preview
K349
Brand: Prorack Pages: 13
Dhollandia DH-RB 05.02 Series User Manual preview
DH-RB 05.02 Series
Brand: Dhollandia Pages: 65
Fortin Electronic Systems EVO-CAN Suggested Wiring Configuration preview
EVO-CAN
Brand: Fortin Electronic Systems Pages: 5

Brands by name

Popular brands

Load more brands