background image

System Functions and Features as of I7.9

Routing elements

107

sy

d-

020

0/3.

– I7.

9

 – 1

1

.2009

Rules in the member group

Any member of a member group can use the menu selection or a */# procedure to 
log out of (#48xx) or log into (*48xx) a user group (see also 

"User group: Logging in 

and logging out", page 465

. Members who have logged out of a group are ignored 

during call distribution. The last remaining member in a group does not have the 
possibility of logging out of the group.

A user may belong to several user groups at the same time. Logging out of or in to 
user groups applies simultaneously to all the user groups or specifically for one par-
ticular user group.

Call Forwarding Unconditional (CFU) for user group members

Activated CFUs of user group members to internal destinations are always carried 
out.

With CFUs to external destinations, PISN users, integrated GSM users or Voice Mail 
the response depends on the configuration:

Tab. 24

CFUs of user group members: System configuration

A member remains in the user group when he activates a CFU to an external desti-
nation, a PISN user, an integrated GSM user or Voice Mail only if both parameters 
are configured to 

Yes

.

If one of the parameters is configured to 

No

, the CFU causes the member to be 

switched out of the user group. The last remaining member in the member group 
does not have the possibility of activating an external, PISN, GSM or Voice Mail CFU 
and cannot log out of the user group.

Notes:

– This response applies only to unconditional CFU (*21) but not to cyclic 

call distribution (*67) or CFNR (*61). 

– If the PBX is connected to the PSTN via analogue network interfaces, a 

user group member with an external, PISN, GSM or Voice Mail CFU is 
always switched out of the user group.

Parameter

Parameter value

Remarks

External forwarding of members enabled

<

Yes

 / 

No

>

Configuration per user group

Remain in user group with external forwarding

<

Yes

 / 

No

>

Configuration per user

Summary of Contents for IntelliGate A150













































































































































































































































































































































































































































































































































Reviews: