manualshive.com logo in svg

Aastra IntelliGate A150, System Manual

Share
Download
Aastra IntelliGate A150 System Manual Download Page 323

System Functions and Features as of I7.9

Features

323

sy

d-

020

0/3.

0 

– I7.

9

 – 1

1

.2009

•

Call lists and contacts are available on all system terminals and are automatically 
synchronised.

•

If a user is not assigned a terminal, he cannot be reached by other users. The des-
tinations configured for when the user is unobtainable are applied.

•

If the terminal is not assigned to any user, it cannot be used. 

Not configured

 is 

then indicated on system terminals with a display.

•

An announcement made to a user is signalled on all of his terminals which sup-
port announcements.

•

Fast Take (*88) can be used to answer a call from one terminal to another termi-
nal belonging to that same user. No special authorizations are required.

Restrictions:

•

Only 16 terminals are allowed per user.

•

Only one each of the following terminals can be allocated to a user:

– DECT  terminal

– IP system terminal as a softphone

•

A user who is assigned a DCT terminal cannot be assigned any other terminals.

Prefix Dialling Procedures

Tab. 139 Procedures

System configuration

Tab. 140 Personal call routing: System configuration

*/# procedure

Remarks

Activate personal call routing

*45 <Call routing 0...5>

The default setting is 0 (call all 
terminals).

Deactivate personal call routing

#45

#45

Activate Ring Alone

*41

Deactivate Ring Alone

#41

Parameter

Parameter value

Remarks

Call routing 1...5

<

Ring

 /

 -

>

Allocated terminals

 tab in the user configuration. 

The default setting 0 (all terminals on 

Ring

) cannot 

be altered.

Description

<Name>

Allocated terminals

 tab in the user configuration.

Status

<

Activated

 / 

Deacti-

vated

>

Status display on the 

Personal call routing

 tab in the 

user configuration.

Summary of Contents for IntelliGate A150













































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands