System Functions and Features as of I7.9
Call routing
229
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
Settings on the source PINX (PINX 1):
•
User configuration:
A permanent CLIP number is configured for internal users in Geneva, which is
transmitted unchanged along with each outgoing call to the public network.
•
Least Cost Routing:
The initial digits of the numbers within the Zurich local rate zone are entered in
the LCR table and allocated a route via the routing and network operator table
(see also
"Least Cost Routing (LCR)", page 181
).
•
Setting up routes:
– All calls sent to the public network via Zurich are routed via a separate route.
Its configuration must
NPI
=
E.164
must be set so that PINX 2 recognises a call as external and routes
it accordingly.
– All calls addressed to PINX 2 users in Zurich are routed via another route
whose configuration contains the setting
NPI
=
PNP
.
– Both routes can be allocated to the same trunk group.
•
Trunk group settings:
–
Network
=
private
–
Protocol
=
PSS1
–
Automatic CLIP
=
Yes
Tab. 80
Settings for break-out routing at the source PINX
(PINX 1 in Geneva)
Parameter
Parameter value
User configuration:
•
Automatic CLIP
No
(permanently CLIP number entry is used)
•
NPI
E.164
•
TON
National
•
CLIP number
022 827 9x xx
(x stands for the user’s DD number)
LCR table:
• ...
...
• 01 810
Zurich (allocate to the "Zurich" routing table)
• 01 811
Zurich (allocate to the "Zurich" routing table)
• 01 813
Zurich (allocate to the "Zurich" routing table)
• ...
...
"Zurich" routing table:
•
Time zone
x
•
Network provider
: BreakOutZH
•
Times
: Allocate the times for "BreakOutZH"
