System Functions and Features as of I7.9
Features
503
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
•
Once a Redkey has been configured, it can only be reconfigured via AIMS.
•
The application on the ATAS server can acknowledge that a function has been
triggered by a Redkey by sending a message to the terminal’s display (with or
without a prompt to acknowledge the message).
Redkey as */# procedure
To be able to perform the Redkey function also on third-party terminals (analogue
terminals, SIP terminals etc.), a */# procedure is available. Possible applications are
analogue terminals in retirement homes, door intercom systems, lift telephones
etc.
Tab. 348 Trigger Redkey function: Procedure
Hotkey modes on DECT system terminals
On DECT system terminals the Redkey function can be configured on the Hotkey.
To ensure that again only one keystroke is needed to trigger the function, the
Hotkey can be limited to one storage location (instead of 6) by using the parameter
1Hotkey only
=
Yes
in the terminal settings. (A long click is required if the keypad
lock is activated.) This setting can be configured with AIMS for each DECT terminal.
Hotkey modes for Office 160Safeguard/ATEX
On the Office 160Safeguard/ATEX system terminal the Redkey function is available
on the large alarm button on the upper side of the handset. With the parameter
1
Hotkey only
=
Yes
the Redkey function is triggered with the automatic alarm trig-
gers (position and motion alarm) as well as the large alarm button and the hotkey.
The following two trigger types can be differentiated by configuring different pa-
rameters:
•
Triggering by hotkey (on the side of the handset):
--> The parameter in the first number memory is added to the ATAS message.
•
The alarm is triggered either manually using the alarm button (on the upper side
of the handset) or automatically by the position or motion alarm:
--> The parameter in the first number memory is added to the ATAS message.
It is irrelevant whether a single, double or long click is carried out. (Exception: If the
keypad lock is activated, a long key is required for triggering using the hotkey.)
*/# procedure
Note
Trigger Redkey function
*73 <Parameter> #
The parameter can contain a maxi-
mum of 28 digits.
