System Functions and Features as of I7.9
230
Call routing
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
Settings at the gateway PINX (PINX 2)
Specifying the transit route
The transit route is specified using the
Transit route
setting. If an incoming call has a
phone number with numbering plan identifier
NPI
=
E.164
, it will be forwarded via
the defined route. This route leads to the public network (see also
Tab. 81
Settings for the break-out routing at the gateway PINX
(PINX 2 in Zurich)
Network operator table:
•
Network provider
"BreakOutZH"
Route
5
•
Conversion rule
N
(add dialled phone number)
Route 5:
•
Name
Zurich, ISDN exchange
•
Trunk groups
2
•
Digit barring
No
(do not consult digit barring)
•
Outgoing connections
Number of connections allowed simultaneously
•
Numbering plan identifier NPI
E.164
•
Type of number TON
Unknown
Trunk group 2:
•
Name
Zurich, PINX 2
•
Network interfaces
Network interfaces of this trunk group
•
Network type
Private
•
Protocol
QSIG
or
QSIG / PSS1 ISO
•
Automatic CLIP
yes
Parameter
Parameter value
Transit route:
•
Route
4 (this route is used for the transit routing)
Route 4:
•
Name
Zurich, exchange
•
Trunk groups
1
•
Numbering plan identifier NPI
E.164
•
Type of number TON
Unknown
Trunk group 1:
•
Name
Zurich, ISDN exchange
•
Network interfaces
Network interfaces of this trunk group
•
Network type
Public
•
Protocol
DSS1
•
Automatic CLIP
yes
Parameter
Parameter value
