Aastra 7434ip User Manual Download Page 59

Page: 59 / 119

IP P

HONE

FOR

MX-ONE™

6/1553-DBC 434 01 Uen C 2010-12-17

The prerequisite is that all the involved telephones have the right service
profile.

To order remote programming of follow-me, do the following:

Lift the handset and wait for dial tone.

Dial

*21*extension number to divert * extension number of the new

answering position#.

Wait for special dial tone.

Replace the handset.

7.1.6

Canceling Follow-me Remotely

To cancel remote programming of follow-me from another telephone
than the telephone with the diverted number:

Lift the handset and wait for dial tone.

Dial

#21*diverted extension number#.

Replace the handset.

The indication of the active follow-me on the telephone with the diverted
number disappears, if there is no additional diversion remaining.

7.2 External

Follow-Me

If external follow-me is allowed, you can have all calls to your extension
diverted to an external number of your choice.

When follow-me is activated, this is indicated in the display. Your phone
can still be used for outgoing calls and you will hear a special dial tone
when you lift the handset.

7.2.1

Ordering External Follow-me from Your Phone

To order external Follow-me, do the following:

Press

Availability

, select

External Follow-me

Enter the digit or digits to get an external line and the external
number.

External Follow-me is shown on the display. The Follow-me key
lamp is switched on.

Note:

Follow-me cannot be activated by pressing the Follow-me key.

Summary of Contents for 7434ip
























































































































Search results

Summary of Contents for 7434ip

Reviews:

Related manuals for 7434ip

Brands by name

Popular brands

Aastra 7434ip, User Manual

Search results

Summary of Contents for 7434ip

Reviews:

Related manuals for 7434ip

Brands by name

Popular brands