6/1553-DBC 434 01 Uen C 2010-12-17
102
S
ETTINGS
13.7 Option
Unit
In section 2.12 Option Unit on page 27, you will find the detailed informa-
tion on the option unit and how you install it.
To modify the option unit settings, do the following:
1.
Press .
2.
Select
Option Unit
, and press
Select
.
Note: Option Unit
is available only when an option unit is
installed.
3.
Select
Busy signal
,
Extra bell
, or
Combined Bell/Busy
, and
press
Select
.
13.8 Security
and
Access
It is possible to view and change the PIN code, if this option has been
configured by system administrator.
13.8.1 Changing
PIN
Code
You can change the PIN code used for logging on to the telephony
system. The PIN is the same as the individual authorization code, see
12.2 Authorization Code on page 81.
Note:
Depending on the phone configuration, the menu option
Changing PIN
may not be available.
To change the PIN code, do the following:
1.
Press .
2.
Select
Security and Access
, and press
Select
.
3.
Select
Change PIN
and press
Select
.
4.
Enter the current PIN code, and press
OK
.
You will be prompted for a new PIN (1-7 digits).
5.
Enter your new code, and press
OK
.
Note:
Only digits can be used as PIN.
6.
Enter the new code again for confirmation, and press
OK
.
