6/1553-DBC 434 01 Uen C 2010-12-17
66
C
ONTACTS
Note:
External number must be preceded with the external access
code. The digits can also be stored by adding the country code
number after a plus sign, for e46 8 719 0000.
8.3 Editing
a
Contact
This section describes how to edit a contact from the phone. It is also
possible to edit a contact via the web interface, see 14.3.1 Contacts
Folder on page 108.
To edit a contact name or number, do the following:
1.
Press .
2.
Select a contact and press
more...
.
3.
Select
Edit
[selected contact]
, and press
Select
.
You can change the contact name, number, or ring melody.
4.
Press
more...
, select what to edit, and press
Select
.
To edit the contact name, continue to 8.3.1 Editing the Name on
page 66.
To edit the contact number, continue to 8.3.2 Editing the Number
on page 67.
To edit the contact ring signal, continue to 8.3.3 Editing the Ring
Signal on page 67.
When entering a name by multi-tapping, the most common letters are
written above each key on the phone. To get the letter A press 2 once,
for B press 2 twice, to get C press 2 three times and so on.
Press * to switch between upper and lower case.
By default, the first character you enter is written in upper case, and the
rest of the word is written in lower case. Every new word starts with an
upper case character (that is, after an entered space).
You can select a different character set from
Settings
, see 13 Settings
on page 92.
8.3.1 Editing
the
Name
To edit a contact name, do the following:
1.
Select
Edit Name
, and press
Select
.
2.
Press
more...
.
