Aastra 6771 User Manual Download | Manualshive

Page: 117 / 148

background image

Features and MenuCards

115

should apply to all configured trunk keys, select the

Device

menu entry and

press

O

. The most recently activated call protection appears in the first line. To

change this setting, select

O

, then the type of protection (

Int./ext. calls

,

Internal

calls

or

External calls

) you want to use. Press

O

to confirm your choice and

activate the function with

On

. You can switch call protection on or off using the plus/

minus key

=

.

When call protection is activated, the caller hears either the ring tone or the busy tone
(this is configured by the system administrator as part of the user groups configu-
ration).

You can also configure call protection for a trunk key by

long

pressing the corre-

sponding trunk key and selecting the

5 Call protect

menu item.

When call protection is activated, the caller hears either the ring tone or the busy tone
(this is configured by the system administrator as part of the user groups configu-
ration). Calls from direct call keys are only signalled visually on this trunk key.

Note

This type of call protection is only activated on the telephone on which it was set. If
your internal call number is configured on the trunk or team keys of other tele-
phones, call protection is not automatically activated on those telephones.

2 Announcement pro...

: (Announcement protection) Switching on (

On

) or switching

off (

Off

) announcement protection for your device. When announcement protection

is activated, no announcements can be made to your telephone (see also page 74).
When there are multiple trunk keys configured on your telephone, you can switch
announcement protection for each of these keys on/off. To do so, select the desired
key and press

O

.

3 Telephone lock

: If you wish to temporarily allow another person to use your tele-

phone, you can activate the telephone lock. Then your telephone is given the authori-
sations for the “Guests” user group. This user group is configured by the system
administrator and prevents unauthorised persons from accessing, reading or making
changes in the telephone’s menus and lists. Dialling rights may also be restricted.
Emergency numbers can be stored in a special list assigned to your user group which
can always be dialled, regardless of the external authorisation. Please contact your
system administrator for information on the altered range of functions when the tele-
phone lock is on. Telephone lock access is user-PIN protected. After entering the PIN
(

PIN:

), activate the function with the

On

option.

«
...
115
116
117
118
119
...
»

Summary of Contents for 6771





















































































































































Reviews:

No comments

Related manuals for 6771

Brand: Sangoma Pages: 12

Brand: iData Pages: 34

Brand: GAI-Tronics Pages: 32

Brand: Samsung Pages: 123

Brand: Samsung Pages: 167

Brand: Archos Pages: 40

Brand: Sagem Pages: 92

Brand: SLIDE Pages: 32

Brand: T-Mobile Pages: 2

Brand: Samsung Pages: 22

Brand: Samsung Pages: 71

Brand: Samsung Pages: 25

Brand: Samsung Pages: 26

Brand: Samsung Pages: 192

Brand: Samsung Pages: 36

Brand: Samsung Pages: 26

Brand: Samsung Pages: 22

Brand: Samsung Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands