Aastra 6771 User Manual Download

Page: 108 / 148

Features and MenuCards

106

Call-back

•

2 Accepted calls

: Here you can see the call numbers of the callers you last spoke

to. You can also edit this list in the same way as the list for missed calls (see
page 105).

Note

Calls which have been signalled on your telephone’s Team keys are not entered into
your call list.

•

3 Voicebox mess.

: Here you can see and edit the list of messages received.

–

Play

: To listen to the message the caller recorded. You can also use the number

keys

(to rewind),

(to pause) and

(to fast forward).

–

Delete

: The message will be deleted after you press

–

Dial

: To call a caller back. Press

or pick up the handset.

P O

Select an entry (call number or name) and press the OK key.

You can open the telephone book by pressing the ABC key while
the handset is

on the hook

(see below for further explanation).

If you press the OK key while the handset is

on the hook

, you can

then perform the following actions:

•

Dial

: Call the caller back. Press the OK key or pick up the

handset.

•

Phone book

: To add an entry to the telephone book (

1 New

Entry

) or add to an existing entry (

2 Add

). See also: Add

Phone Numbers to Telephone Book from Lists or during a
Call starting on page 83.

•

Info

: Provides you with information on callers (e. g. call

number, if the caller’s name is displayed in the call list), time
of the call and number of calls. When you have multiple
trunk keys configured on your telephone, the trunk key on
which the call was received is indicated.

Summary of Contents for 6771




















































































































































Search results

Summary of Contents for 6771

Reviews:

Related manuals for 6771

Brands by name

Popular brands

Aastra 6771, User Manual

Search results

Summary of Contents for 6771

Reviews:

Related manuals for 6771

Brands by name

Popular brands