Aastra 6771 User Manual Download Page 47

Page: 47 / 148

Telephoning

Audio: Muting, Open-Listening, Adjusting Telephone Volume

Muting

While using the phone, you may switch off the microphone if you wish. The person
you are speaking with will not be able to hear you:

Enabling Others to Listen In

Adjusting Volume

Press the muting key.
Press it once again to switch the microphone back on.

To allow others present to hear the telephone conversation,
press the hands-free/open-listening key.

By switching on the loudspeaker, you may continue your call in
hands-free mode.

L h

Keeping the hands-free/open-listening key depressed, replace
the handset in the telephone cradle. Then release the hands-
free/open-listening key.

G =

To adjust volume during a call, use the plus/minus key:

•

for handset volume

•

or – if you’re using a headset – for headset volume

•

or – if you have the loudspeaker switched on – for loud-
speaker volume.

This setting applies to the current call. To adjust volume perma-
nently, please refer to the chapter MenuCard “Phone Settings”
starting on page 113.

Summary of Contents for 6771




















































































































































Search results

Summary of Contents for 6771

Reviews:

Related manuals for 6771

Brands by name

Popular brands

Aastra 6771, User Manual

Search results

Summary of Contents for 6771

Reviews:

Related manuals for 6771

Brands by name

Popular brands