Aastra 6771 User Manual Download Page 59 | Manualshive

Page: 59 / 148

background image

Telephoning

57

scriber for whom you picked up the call must belong to a user group for which “Call
removal” authorisation is activated, otherwise you will not be able to use the “Pick-up
selective” function.

Note

If the called subscriber is a member of a user group for which pick-up protection is
active, “Pick-up” and “Pick-up selective” are not possible.

Take

: You accept a current call from a different terminal at your telephone and con-

tinue your call on your telephone. The prerequisite is that your telephone and the
other terminal have the same internal call number. You can also programme the
function “Take” to a feature key (see also Programming Functions (Features) starting
on page 129).

Announcement…

: After entering the call number, you can initiate an announcement

to another system telephone, or on a group of system telephones.

Intercom

: After entering the device ID, you can initiate an announcement to a

single

system terminal. The microphone is activated on the terminal called and the person
you are calling can immediately answer your announcement. The “intercom” function
cannot be used for announcements to a group of terminals.

Charges

: For each trunk key, you can view the charges for the last call as well as the

total charges.

Door opener

: This activates the door opener.

Notes

: Note a call number and a name or dial a noted call number.

Suppress number

: For the following (external or internal) call, your call number will

not be shown to the subscriber. This menu item is dependent on the system settings.

Transmit number

: For the following call, your call number will be presented to the

called subscriber. This menu item is dependent on the system settings.

LCR off

: This switches off the LCR function.

VIP call

: Your next internal call is made as a VIP call.

Main menu

: This opens the Main menu; see the section entitled Main Menu starting

on page 103. You can also open this menu by long pressing the MenuCard key.

«
...
57
58
59
60
61
...
»

Summary of Contents for 6771





















































































































































Reviews:

No comments

Related manuals for 6771

Brand: Olympia Pages: 52

Brand: Smartlink Pages: 8

Brand: QUO Pages: 16

Brand: Audiovox Pages: 44

Brand: Lephone Pages: 23

Brand: TELNET Pages: 8

Brand: Grandstream Networks Pages: 19

Brand: Samsung Pages: 102

Brand: Samsung Pages: 128

Brand: Samsung Pages: 1

Brand: Xiaomi Pages: 50

Brand: Xiaomi Pages: 101

Brand: Zte Pages: 79

Brand: Olive Pages: 65

Brand: Zte Pages: 9

Brand: Acer Pages: 66

6125 - Cell Phone 11 MB

Brand: Nokia Pages: 177

6133 - Cell Phone 11 MB

Brand: Nokia Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands