Aastra 6771 User Manual Download

Page: 95 / 148

Team Functions

Using Trunk Keys

Using Team Keys

Using Direct-call Keys

Accepting Calls

For information on how to use this function, please also refer to the chapter entitled
Accepting Calls starting on page 66.

Using Trunk Keys

Calls are indicated on the appropriate trunk key by a visual signal and (if configured)
acoustically as well.

Trunk key 1 is automatically seized when you lift the handset,
press the hands-free/open-listening key or the headset key
(prerequisite: the headset is switched on, see page 114). You can
make internal and external calls.

If you have programmed several trunk keys on your system tele-
phone, you can seize them separately.

To call another team member, simply press their team key.

Via direct-call keys you can call team members even if they have
programmed a substitute.

You can accept the call by picking up the handset, or

pressing the trunk key, or

pressing the hands-free/open-listening key, or

pressing the headset key (prerequisite: the headset is switched
on, see page 114).

Summary of Contents for 6771




















































































































































Search results

Summary of Contents for 6771

Reviews:

Related manuals for 6771

Brands by name

Popular brands

Aastra 6771, User Manual

Search results

Summary of Contents for 6771

Reviews:

Related manuals for 6771

Brands by name

Popular brands