70
17.
CONNECTION TO Peripheral EQUIPMENT
17.1.
Connection to the AD-8127 Multi Printer or AD-8126 Mini Printer
When connecting the printer to the balance for printing measured values, configure the printer and the
balance as follows according to these usage examples.
Internal settings of the printer
Usage example
AD-8126
Mini printer
AD-8127
Milti printer
Printing mode settings
When printing values measured by the balance with
the balance’s PRINT key or its “Auto-print” mode.
No setting
EXT.KEY
When printing values measured by the balance with
the printer’s “Printing” key or while in its timer mode.
When printing charts with the printer.
MANUAL
AUTO
TIMER
CHART
When printing the balance’s statistical calculation
results.
When printing the balance’s GLP data output.
No setting
DUMP
□
Refer to the instruction manual of the AD-8127 for how to change internal settings of the AD-8127 multi
printer.
Internal settings of the balance
Usage example
Balance
p r t
Data output mode
Balance
t y p E
Data format
When printing values measured by the balance
with the balance’s PRINT key or its
“Auto-print” mode.
0
,
1
,
2
,
4
,
5
0
When printing values measured by the balance
with the printer’s “Printing” key or while in its
timer mode.
When printing charts with the printer.
3
,
6
0
When printing the balance’s statistical
calculation results.
When printing the balance’s GLP data output.
0
,
1
,
2
,
4
,
5
,
6
1
Precautions on use of the AD-8126 mini printer
□
The AD-8126 is a dump printer. It prints data output from the balance as is.
We recommend changing the printer settings to dump print format because the output format of
the balance is set to A&D standard format at shipment.
□
To set the balance to dump print format, set the function setting “
type
” to “
1
”.
Summary of Contents for FZ-i WP Series
Page 95: ......
