9
2.2.
Assembling
Install the balance as follows:
1. Place the balance on a solid weighing table. Refer to “2. PRODUCT CONFIGURATION (PART
NAMES), INSTLLATION AND PRECAUTIONS” to assemble the weighing pan and breeze break.
2. Level the balance by turning the leveling feet so that the bubble in the bubble spirit level is inside
the red circle.
3. Connect the AC adapter plug to the
AC adapter jack
on the rear side of the balance and connect
the plug on other end of the cord to an outlet. * If the AC adapter plug is difficult to insert, insert
the plug while twisting it.
Note
Confirm that the AC adapter type is correct for the local voltage and power receptacle
type.
4. Connect the balance to the power for at least 30 minutes with nothing on the weighing pan
before use.
Summary of Contents for FZ-i WP Series
Page 95: ......
