A&D FZ-i WP Series, Instruction Manual

Page: 74 / 96

74
18.
COMMANDS
18.1. Command List
Note
A command has a terminator added, that is specified using the "Terminator (
Crlf
)"
parameter of “Serial interface (
5if
)” in the function table, and is sent to the balance.
Commands to query weight data
C Cancels the S or SIR command.
Q Requests the weight data immediately.
S Requests the weight data when stabilized.
SI Requests the weight data immediately.
SIR Requests the weight data continuously.
E
S
C
P Requests the weight data when stabilized.
Note
: The “Q” and “SI” commands, the “S” and “
E
S
C
P” commands behave the same.
Commands to control the balance
CAL Same as the CAL key.
EXC * Calibration using an external weight
OFF Turns the display off.
ON Turns the display on.
P Same as the ON:OFF key
PRT Same as the PRINT key
R Same as the RE-ZERO key
SMP Same as the SAMPLE key.
T Tare key
Z Same as the RE-ZERO key
E
S
C
T Same as the RE-ZERO key
U Same as the MODE key
?ID Requests the ID number.
?SN Requests the serial number.
?TN Requests the model name.
?PT Requests the tare weight.
PT:
∗∗∗∗∗
.
∗
g Changes the tare weight.
The unit added is the current weighing unit in A&D standard format.
?UW Requests the unit mass value.
UW:
∗∗∗
.
∗∗∗
g Changes the unit mass value (weight per piece).
Use the unit code (three digits) in A&D standard format for the unit.
?KL Requests the key lock status.
KL,000 All keys unlocked
KL,001 All keys locked
KL:
∗∗∗
Changes the key lock status.
KL:000 Unlock all keys
KL:001 Lock all keys
Note
: The “R”, “Z” and “
E
S
C
T” commands behave the same.
E
SC
:
ASCII code 1Bh
* :
Only for the FZ-
i
/ FZ-
i
WP / FZ-GD series