User manual
When the Pedelec is stopped, please be
aware of the following:
• If the pushing aid (see section 3.2.7) is
activated, you need to turn the Pedelec's
pedals 2 to 3 times the Pedelec has been
stopped before the motorised assistance
will be available again - you can increase
or reduce the assistance level using the
buttons on the controller.
• If the pushing aid is deactivated, the
motorised assistance is instantly available
when moving the pedals. Similarly, the
assistance level can also be increased or
reduced when the Pedelec is standing
still.
The field [12] of the start menu has
multiple functions. By briefly pressing
the controller button [2], various travel
information can be displayed (see section
3.2.10).
5.3.2.5 Activating recuperation
By activating recuperation, you can recover
energy when travelling and feed it into the
battery. This is possible and advisable from
a speed of 15 km/h. The recuperation is
activated and adjusted using the controller
buttons [1] and [3].
• One white bar element [10] means: 50%
energy recovery in the battery (factory
setting, configurable)
• Two white bar elements mean: 100%
energy recovery in the battery (factory
setting, configurable)
Depending on the battery used and the
speed, a maximum of 6A to 8A is recovered
in case of 100% energy recovery. If you
want to deactivate recuperation, this is also
done using the controller button [1].
During energy recovery, "0 A" is shown
in field [12] and the charging process [a]
symbol is shown in field [11]. If the energy
cannot be recovered because the battery
is already charged to above 90% then the
[b] symbol is displayed instead. In this case,
the sMMI's software waits for the battery
to be partially drained then automatically
switches on recuperation and changes to
the [a] symbol.
Summary of Contents for Orsted
Page 1: ...1 Operating instructions rsted...
Page 39: ...39...
