29
Use of the pushing aid
• The pushing aid is used by pressing the controller button [1]. As
a result, the motor is switched on and moves your Pedelec at a
maximum speed of 6 km/h as long as you press and hold button
[1]. This is shown in field [13] as a white bar element.
• If the buttons [1] or [3] are released, the motor is switched off. It
can only be switched on when the Pedelec/Handbike is stopped.
• If the pedals are moved during pushing, the sMMI automatically
changes to the preset assistance level mode (see section 3.2.4) so
that the selection activated there is available for you.
• If the pedals are no longer moved, the sMMI switches back to the
pushing aid.
• If the sMMI is switched off, the activation of the pushing aid will
remain in the programme and will be immediately operational the
next time the sMMI is switched on. However, you first have to pedal
2 to 3 times before the motor moves the Pedelec when the button
[1] or [3] is pressed.
• The pushing aid's maximum speed can be adjusted by your
specialist dealer according to your requirements.
Summary of Contents for Orsted
Page 1: ...1 Operating instructions rsted...
Page 39: ...39...
