User manual
5.3.2.14 USB port
The sMMI has a USB port [14] which is
primarily used by your specialist dealer
for maintenance and diagnosis. Make
sure the rubber cover fixed above is
always fully inserted and seals the port.
If the sMMI is not fully sealed, moisture
can get inside and steam up the display from inside.
5.3.2.15 Programming options through the specialist dealer
Your neodrives drive system has been optimally adjusted for your
A2B at the factory, so there is usually no need for any changes.
If individual changes are required owing to your preferences, the
following parameters can be programmed:
Speed of the forward pushing aid:
Set to 6 km/h in the factory settings (maximum legally permissible
value). This value may only be reduced.
Standard assistance level:
The assistance level which is always available after switching-on
the Pedelec. Adjustable from 0 - 5, value 3 is preprogrammed in
the factory settings.
sMMI standard settings:
Language settings, time format (12/24 h)
sMMI lock:
The sMMI can optionally be permanently connected to the motor.
As a result, the sMMI is only operable with this motor/system and
cannot be used with another motor.
Service interval:
Depending on the appropriate maintenance interval specified,
this interval can be set or reset by date or kilometres travelled
(depending on which is first).
Wheel circumference:
To correctly display the speed and comply with statutory provisions
regarding speed restriction, the bicycle dealer may change the
wheel circumference. This is only necessary if the drive wheel is
subsequently fitted with a tyre increasing or reducing the original
wheel circumference or if the motor has been readjusted to a larger
or smaller rim.
This parameter may only be changed if the statutory requirements
are complied with (max. 25 km/h for Pedelecs); in case of misuse
the warranty and product liability will become void. Furthermore,
illegal tampering may lead to criminal consequences if detected
during police checks
All changes to the travel parameters are logged in the sMMI's
data storage.
Summary of Contents for Orsted
Page 1: ...1 Operating instructions rsted...
Page 39: ...39...
