User manual
Height adjustment
1. The seat height can be adjusted by loosening the quick release
for the saddle post.
2. Position the saddle at the desired height. Do NOT position the
saddle higher than the minimum insertion mark located on the
saddle post UNDER ANY CIRCUMSTANCES.
3. Push the quick release lever towards the frame, until it is closed
again. In order to avoid the risk of injury, the lever must not stick
out. The lever is safely fastened if it takes effort to push it into
the closed position. The amount of effort is appropriate if the
lever leaves a mark on the palm of your hand when pressing.
A properly closed quick-release cannot be moved any more
unless it is reopened as specified above. If you can move
the mechanism slightly, open the quick release lever, turn the
adjusting nut by another 180° and try again.
Frame Heigh
t
Frame Heigh
t
Inside Leg Heigh
t
Frame Height
1 inch / 2,5 cm
Clearance
Inside Leg Height
4. After height adjustment, check that the saddle cannot be moved
in any direction.
An improperly attached saddle may lead to severe or even
fatal injuries. Ensure that the saddle clamp screw (saddle post -
saddle) has been tightened using 27 Nm.
• This user manual provides no guarantee as to the safe use of the
A2B under all conditions.
Summary of Contents for Orsted
Page 1: ...1 Operating instructions rsted...
Page 39: ...39...
