63
the fork until it is closed again. In
order to avoid the risk of injury,
the lever must not stick out. The
lever is safely fastened if it takes
effort to push it into the closed
position. The amount of effort is
appropriate if the lever leaves a
mark on the palm of your hand
when pressing. When the lever is closed, the OPEN label is no
longer visible. A properly closed quick-release cannot be moved
any more unless it is reopened as specified above. If you can
move the mechanism slightly, open the quick release lever, turn
the adjusting nut by another 180° and try again.
5. Make sure that the brake disk is sitting correctly between the
brake calipers and is correctly adjusted.
If such installation and adjustment of the brakes is not
completely clear, ask your A2B specialist dealer to adjust the your
A2B's brakes for you. Incorrectly adjusted brakes have reduced
efficiency which can lead to accidents resulting in severe or even
fatal injuries and/or material damage. Do NOT use your A2B if you
are not sure whether the brakes are working properly.
Remounting the front wheel
1. Position the front wheel in the
fork in such a way that the quick
release lever is on the left-hand
side of the fork.
2. Adjust the lever to the open
position (OPEN, i.e. the lever
is bent away from the hub) and
push the front wheel axle into the
dropouts of the fork.
3. Turn the adjusting nut on the right-
hand side of the hub in clockwise
direction so that you can feel
resistance when closing the lever
(when the lever is parallel to the
midline of the hub).
4. Hold the fork tightly in your left
hand and push the lever towards
Summary of Contents for Orsted
Page 1: ...1 Operating instructions rsted...
Page 39: ...39...
