65
Remounting the rear wheel
Carry out the steps for removal (7-1) in reverse order.
A. Remount the torque support. Otherwise, the frame may be
damaged.
B. Ensure that the rear wheel is centred in the frame before safely
tightening the hub axle nuts using 60 Nm.
C. Make sure that the brake disk is sitting correctly between the
brake calipers and the wheel is turning freely without the brake
blocks rubbing on it.
If such installation and adjustment of the brakes is not
completely clear, ask your A2B specialist dealer to adjust the
your A2B's brakes for you. Incorrectly adjusted brakes may have
reduced efficiency which can lead to accidents resulting in severe
or even fatal injuries and/or material damage. Do NOT use your
A2B if you are not sure whether the brakes are working properly.
D. Check the correct fit of the chain on the front and rear
chainrings.
E. Reattach the cable holders to the dropout and the frame.
B
E
Summary of Contents for Orsted
Page 1: ...1 Operating instructions rsted...
Page 39: ...39...
