User manual
Removing the rear wheel
1. Ensure that the battery is no longer connected to the system.
To that end, remove the battery from the vehicle.
2. Remove the cable holders (on the back of the dropout and
on the bottom side of the left chain stay) using an appropriate
Allen key.
3. Disconnect the plug connectors for the power and control cables
leading to the motor.
5
3
2
4
7
1
4. Loosen and remove the hub axle nuts using a 19-mm wrench.
5. Loosen and remove the torque support retaining screw on the left-
hand side of the dropout.
6. Remove the torque support from the A2B by pushing it from the
axle.
7. Now pull the rear wheel from the frame while at the same time
removing the chain from the freewheel.
6
Summary of Contents for Orsted
Page 1: ...1 Operating instructions rsted...
Page 39: ...39...
