23
5.3.2 Functions of the sMMI
5.3.2.1 Switching on and off
Switching on
To switch the sMMI on, press the menu button [2] on the controller.
After a couple of seconds, a welcome screen will appear followed
by the start menu shown opposite. If functions are already activated
or the battery is not fully charged, the display of your sMMI may
differ in parts from the illustration.
Switching off
To switch off your Pedelec, you need to press button [2] on the
controller for about 2 seconds while the start menu is displayed.
By doing so, you access the submenu shown opposite. In this
display, you can jump up or down using buttons [1] and [3] on the
controller. Any selected field is displayed within a U-shaped border.
Select the "Switch off" field and briefly press button [2]. Your
Pedelec will now be switched off.
Automatic switch-off
If your Pedelec is not used for 10 minutes, the system will
automatically be switched off. Pressing the menu button again will
switch the system back on.
Do not switch off your Pedelec by removing the sMMI, this
may damage the electronics.
Summary of Contents for Orsted
Page 1: ...1 Operating instructions rsted...
Page 39: ...39...
