A-TS
11
https://a-ts.cn/en/
default settings of the inverter. Otherwise it will cause damage to the
devices.
If you need parameter identification, please notice the risk of
injuries in motor rotation. Do not touch the rotating part of the motor
during the motor auto-tuning or running. Or, it may cause an accident !
Please do not arbitrarily change the default parameters of inverter;
otherwise it may result in equipment damage !
During operating
:
DANGER
When the user selects the function re-starting, please do not stay
close to the mechanical equipment, otherwise it may cause personal
injury !
Do not touch the radiator, fan or the discharging resistor to check
the temperature, otherwise it may get burned !
Only qualified personnel shall detect the signal, otherwise it may
cause personal injury or equipment damage !
When the inverter is running, please don’t let any sundries fall into
the device, or it may cause equipment damage !
Please do not start/stop the AC drive by turning the contactor
ON/OFF, otherwise it would cause device damage !
During maintenance:
DANGER
Ensure the inverter is disconnected from all power supplies before
starting repair or maintenance. Never repair or maintain the inverter with
electrification, otherwise it may cause injury or electric shock !
Do not repair or maintain the inverter when power-on. Before the
maintenance or repair, wait at least ten minutes after power off and ensue
the inverter “CHARGE” light off, otherwise the residual charge on the
capacitor may cause personal injury !
!
CAUTION
!
CAUTION
