A.MENARINI GlucoMen Day CGM User Manual Download

Page: 62 / 68

Additional Informa

tion

English

The charger can be isolated by unplugging the USB char-

ging cable from the PC. Misuse of the USB cable can pre-

sent electric shock hazards.

NOTE: If necessary, the USB charging cable can be used

with an AC wall adapter, connected to an AC power outlet

that can meet the specifications listed in SECTION 17.4.5.

CAUTION

Use of accessories, transducers and cables other than

those specified or provided by the manufacturer of this

equipment could result in increased electromagnetic

emissions or decreased electromagnetic immunity of this

equipment and result in improper operation.

Specification

Description

Operating temperature

5°C to 45°C (41°F to 113°F)

Storage temperature

5°C to 45°C (41°F to 113°F)

Input/output

5 VDC, 0.5A

Connector type

USB A (male) to USB micro B (male)

Length

1 metre (3 feet)

17.5

Labelling symbols

These symbols may be found on your GlucoMen Day

CGM System packaging.

17.4.3

Sensor insertion tool specifications

17.4.4

Transmitter charger specifications

17.4.5

AC wall adapter specifications

NOTE: the AC wall adapter is not included.

17.4.6

USB charging cable specifications

The USB charging cable can be used for powering the

transmitter charger. The USB charging cable can be con-

nected to a PC USB port that can meet the input and con-

nector type specifications listed to the right.

Specification

Description

Life

5 years

Specification

Description

Life

5 years

Storage temperature

5°C to 45°C (41°F to 113°F)

Operating temperature

5°C to 45°C (41°F to 113°F)

Altitude

Up to 3048 metres (10,000 feet)

Atmospheric pressure

700 hPa - 1060 hPa

Specification

Description

Class

II, 60601-1-2 4th ed. and 60601-1

ed. 3.1 compliant

Input

AC Input 100-240 Vac, 50/60Hz, 0.2A,

0.2A rms at 100 Vac

DC output

5VDC (fixed), 0.1A (minimum)

Output connector

USB type A receptacle

Summary of Contents for GlucoMen Day CGM





































































Search results

Summary of Contents for GlucoMen Day CGM

Reviews:

Related manuals for GlucoMen Day CGM

Brands by name

Popular brands

A.MENARINI GlucoMen Day CGM, User Manual

Search results

Summary of Contents for GlucoMen Day CGM

Reviews:

Related manuals for GlucoMen Day CGM

Brands by name

Popular brands