35
Tr
ansmit
ter
s
/
English
8.3.2
Current session
The current session details section provides information
about the current session.
A. Session status
Status is either STARTED or NOT STARTED.
B. Active transmitter
ID of the active transmitter.
C. Start time of current session
D. End time of current session
End time is 14 days after the start time. The end time is
only visible if a session is in progress.
E. Time of last calibration
F. Calibrate button
Tap to calibrate. This button will be disabled if calibration
is not possible.
G. Stop button
Tap to stop the session. This button will be disabled if a
session is not in progress.
Transmitters
screen message
What it means
Connecting
transmitter…
The system is connecting to your transmitter.
Remove transmitter
[TRANSMITTER ID]
from the charger to
activate.
Activating
transmitter…
The system is trying to activate the transmitter
indicated by [TRANSMITTER ID].
You must remove the transmitter from the
charger in order to activate it.
See SECTION 8.6 for details about activating
a transmitter.
NEXT STEP
Follow sensor
insertion
instructions. It may
take 1-3 minutes to
detect the sensor.
A transmitter is connected, but a session has
not been started.
See CHAPTER 4 for details about starting a
session.
Starting session…
The session is starting. A progress bar
indicates the amount of time before you can
calibrate.
NEXT STEP
Time to calibrate.
Enter a blood
glucose reading.
See CHAPTER 5 for details about calibrating.
Saving calibration…
The system is saving the calibration reading.
Collecting data…
After the first calibration of a session, the
system needs time to collect data. A progress
bar indicates the amount of time remaining.
Stopping session…
The session is stopping.
A
B
C
D
E
F
G
Summary of Contents for GlucoMen Day CGM
Page 1: ...User Guide ...
Page 67: ......