Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
25
9442
[M-code Setting] Third spindle suction
hood up
144
9443
[M-code Setting] Third spindle suction
hood down
145
9444
[M-code Setting] Forth spindle suction
hood up
146
9445
[M-code Setting] Forth spindle suction
hood down
147
Adsorption Function
4.3.
1.
The system provides two types of adsorption, one is the partition adsorption control on the worktable
surface; the other is the adsorption control of the entire worktable, as shown in the following diagram:
2.
The adsorption related parameter setting is located in the system value in the user parameters.
Parameter
No.
Parameter Content
8309
Maintenance time (ms) of vacuum destruction 1
8310
Maintenance time (ms) of vacuum destruction 2
3.
The adsorption related M-code setting is located in the M-code setting in the user parameters.
Parameter No.
M-code Content
Default
Value
9408
[M-code Setting] Adsorption 1 on
90
9409
[M-code Setting] Adsorption 1 off
91
9410
[M-code Setting] Adsorption 2 on
96
9411
[M-code Setting] Adsorption 2 off
97
9412
[M-code Setting] Vacuum pump 1
on
10