Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
17
3.6.2.
Bamboo hat type tool magazine setting
Function Path: Compensation Group > Next Page> Bamboo hat type Tool magazine
1.
If the bamboo hat type tool magazine is used, the related settings of tool magazine can be performed
via this page.
2.
The bamboo hat type tool-changing coordinates are the actual tool-changing positions. If the
tool-changing offset is required, it needs to be set in the offset parameters.
3.
Note
：
The value of the first speed and second speed of the tools must be set, otherwise the system
will give an alarm when the tool is changed.
3.6.3.
Drilling setting
Function Path: Compensation Group > Next Page> Drilling Settings
1.
If the drilling tool magazine is used, you can set the drilling offset through this page.
2.
This screen provides 9 straight drill control interfaces, users can click the mouse or use the arrow
keys + ENTER button to perform related motion control.
3.
The drilling tool number starts from T21, the straight drill is T21 – T40, the horizontal drill is T41 –
T60, and the saw blade is T61.
