Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
5
1.1.2.
Mode area
The mode ares is divided into 5 parts
-
Lamp signal
:
There are three lamp signals, which are the system preparation completion, the ZRN
completion and the system alarm.
-
Incremental inch setting
:
For the incremental inch function, eight different length settings are
provided, and the system mode is automatically switched to the incremental inch mode after setting.
-
Mode switching
:
Six modes are available: auto, MDI, handwheel, inch, incremental Inch and origin.
-
Processing accessibility
:
Two functions are available, namely handwheel simulation and single
section execution.
-
Operation button
:
Three operation buttons are provided, which are system reset, starting of
processing, and program pause.
1.1.3.
Operating area
Operating area is divided into four parts
-
Arrow buttons
:
Provides selection buttons for each axial movement during manual operation
(inching/incremental inching). The selection button of the rapid positioning (RAPID) mode is in the
middle. When clicking in the inching mode, it becomes the fast forward mode, and then return to the
inching mode when clicking again.
-
Override adjustment
:
Provides three override adjustment modes of fast forward override, feedrate
override and spindle override.
-
Selectable function buttons
:
F1-F12 is a customized operation menu, which can be selected according
to the actual machine configuration.