Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
14
Scheduling Machining
3.4.
Function Path: Edit Group > Scheduling machining
1.
The scheduling processing screen is as follows, divided into left and right two screens, the left screen
shows all current machining programs of the system; the right screen shows the machining program
and scheduling sequence selected for scheduling.
2.
There are three modes of scheduling processing, which are described as follows:
-
No use of scheduling: this function of scheduling processing is not used.
-
Manual starting: Using the scheduling processing, the system will automatically start the next
machining program of the schedule after each execution of the machining program, but the user must
manually press to start machining.
-
Auto starting: Using the scheduling processing function, the system automatically starts the next
machining program of the schedule after each execution of the machining program, and automatically
starts the machining until the user presses the reset or the program pauses.
※
Note
：
The scheduling processing function is a system selective configuration, not a standard
