Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
30
-
M-code setting
：
The M-code value setting of the woodworking machine related functions, for
example: positioning on and off, vacuum pump on and off, adsorption on and off, etc. If the user
forgets the M-code of related function, it can also be viewed on this page.
System Parameters
5.2.
Function Path: Maintenance Group > Parameters (It's required to switch the system level to 5)
The parameter setting is divided into 2 major parts and a total of 9 items, which are described as follows:
Part 1: Common parameter settings; this part sorts out the common parameters inside the system, which is
convenient for machine debugging.
Part 2: Servo parameters and advanced parameters; this part is the drive parameters and all parameters of
the system.
-
Operation parameters:
Set the relevant function parameters within the system, such as: preset feed
rate, G31 related parameters, etc.
-
System parameters:
Set hardware connection parameters related to the system, such as hardware
type (host type), CIO setting (bus IO board), etc.
