Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
15
configuration. If you need this function, please contact the machinery factory.
This function needs to be selected and enabled to use the path, as shown below
Function not enabled
Function Enabled
F8 position has no scheduling processing
buttons
F8 position has scheduling processing buttons
Automatic Tool Setting
3.5.
Function Path: Compensation Group > Automatic Tool Setting
1.
The automatic tool setting function provides three tool setting modes as follows:
Single-tool single workpiece: only one tool and one workpiece are processed during machining.
Single-tool multi-tasking workpiece: Only one tool is used for machining, but there are
different machining workpieces.
Multi-tool multi-tasking workpiece: tool change will be carried out during machining, and there
will be a variety of different machining workpieces. Generally, woodworking machines are of
this type.
2.
Multi-tool multi-tasking tool-setting steps
：
i.
Perform the tool-setting first (press the tool-setting on the screen to start).
ii.
The tool-setting operation is started for the parameters set on the screen.
