Controller Object Commands
www.3ware.com
72
/cx set rebuildrate=<1...5>
This command sets the rebuild task rate of the specified controller. The
rebuild task rate sets the rebuild execution priority relative to I/O operations.
This task rate is of the range [1..5], where 5 denotes the setting of fastest
background task and slowest I/O, as follows:
5 = fastest rebuild; slowest I/O
4 = faster rebuild; slower I/O
3 = balanced between rebuild and I/O
2 = faster I/O; slower rebuild
1 = fastest I/O; slowest rebuild
This command applies to the 7000, 8000, and 9000 models controllers.
Example:
//localhost> /c1 set rebuildrate=2
Setting Rebuild background task rate on /c1 to [2] (faster I/O) ... Done.
Related Commands
/cx show rebuildmode
/cx set rebuildmode=<adaptive|lowlatency>
/cx show rebuildmode
/c
x
set verify=enable|disable|1..5
Enabling and disabling verify schedules is only for 9000 series controllers.
This command enables or disables the advanced Verify Task Schedule defined
for controller
/cx
and (when enabled) sets the priority of verification versus
I/O operations. When enabled, verify tasks will only be run during the time
slots identified in the verify task schedule. If a verify is taking place when the
schedule is enabled, it will be paused until the next scheduled time.
The priority of verify versus I/O operations is specified with
1..5,
where 5 is
more resources and 1 the least. Setting this value to 5 implies fastest verify,
and 1 implies fastest I/O.
5 = fastest verify; slowest I/O
4 = faster verify; slower I/O
3 = balanced between verify and I/O
Note:
In previous versions of the CLI, 1 was incorrectly reported to be the fastest
rebuild rate, and 5 was incorrectly reported to be the slowest—the opposite of the
actual settings. In 9.5.2, the scale is reported correctly, as described above, with 5
the fastest rebuild rate.
Summary of Contents for 720-0192-00
Page 3: ......