3Ware 720-0192-00, Manual

Page: 143 / 150

Chapter 2. CLI Syntax Reference
135 3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.2
/cx show attribute [ attribute ...] where attribute is:
achip|allunitstatus|autocarve(9KSX/SE/SA)
|bios|driver|firmware|autorebuild(9KSX/SE only)
|carvesize(9KSX/SE/SA|drivestatus[pause[lines=n]]|
ctlbus(9KSX/SE/SA)|memory|model|monitor|numdrives|
numports|numunits|unitstatus|ondegrade(9500S only)|
pcb|pchip|serial|spinup|stagger
/cx show all where all means Attributes and configurations.
/cx show diag
/cx show
/cx show rebuild (9000 series)
/cx show rebuildmode (9KSE/SA)
/cx show rebuildrate (9KSE/SA)
/cx show verify (9000 series)
/cx show verifymode (9KSE/SA)
/cx show verifyrate (9KSE/SA)
/cx show selftest (9000 series)
/cx show phy (9690SA only)
/cx show dpmstat [type=<inst|ra|ext>]
(9000 series for type=inst and type=ra; 9KSE/SA
for type=ext)
/cx add type=< RaidType > disk=< p:-p.. > [stripe=< Stripe >]
[noscan][nocache|nowrcache][nordcache|rdcachebasic]
[group=<3|4|5|6|7|8 |9|10|11|12|13|14|15|16>]
(group=13-16 9690SA only)[name=string (9000 series)]
[ignoreECC][autoverify][noqpolicy][v0=n|vol=a:b:c:d]
(n,a,b,c,d = size of volume in GB) (9000 series)
[storsave=<protect|balance|perform>(9KSX/SE/SA)
[rapidrecovery=(all|rebuild|disable)] (9KSE/SA only)
RaidType={raid0, raid1, raid5, raid10, raid50, single,
spare, raid6 (9650SE and 9690SA)}
/cx add rebuild= ddd:hh:duration (9000 series)
/cx add verify= ddd:hh:duration (9000 series)
/cx add selftest= ddd:hh (9000 series)
/cx del rebuild= slot_id (9000 series)
/cx del verify= slot_id (9000 series)
/cx del selftest= slot_id (9000 series)
/cx set ondegrade=cacheoff|follow (9500S only)
/cx set spinup= nn (9000 series)
/cx set stagger= nn (9000 series)
/cx set autocarve=on|off (9000 series)
/cx set carvesize=[1024..32768] (9KSX/SE/SA only)
/cx set rebuild=enable|disable|<1..5>
(enable|disable for 9000 series)
/cx set rebuildmode=<adaptive|lowlatency> (9KSE/SA only)
/cx set rebuildrate=<1..5> (9KSE/SA only)
/cx set verify=enable|disable|<1..5>
(enable|disable for 9000 series)